27 May 2025

Cable Cleats Built for Demanding Installations

Elpress now offers more than just world-class crimping systems. 𝗪𝗲’𝗿𝗲 𝗲𝘅𝗽𝗮𝗻𝗱𝗶𝗻𝗴 𝗼𝘂𝗿 𝗿𝗮𝗻𝗴𝗲 𝘄𝗶𝘁𝗵 𝗮 𝗸𝗲𝘆 𝗮𝗰𝗰𝗲𝘀𝘀𝗼𝗿𝘆 𝗳𝗼𝗿 𝘀𝗮𝗳𝗲 𝗮𝗻𝗱 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝘁 𝗲𝗹𝗲𝗰𝘁𝗿𝗶𝗰𝗮𝗹 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻𝘀 – 𝗖𝗮𝗯𝗹𝗲 𝗖𝗹𝗲𝗮𝘁𝘀. Engineered to meet IEC 61914 standards, our cleats provide robust short-circuit protection and professional cable management – perfectly complementing the Elpress system.

Go to Product

More Elpress News:

About us Elpress News Innovations Cases Global distribution

    Products
    • Cu terminals
      The terminals for Cu conductors 0.75 mm² to 1000 mm² are made of copper 99.9%. As a standard, we manufacture tube terminals (type KR/KRF/KRD/KRT), through connectors (type KS/KSF/KSD/KST) and C sleeves, but also largely customised connectors. The Elpress system fits both stranded conductors, as per IEC 60228 class 2, and flexible conductors as per IEC 60228 class 5 and class 6.
      AlCu terminals
      Elpress AlCu terminals for Al conductors are made of solid material.
      Al terminals
      Elpress terminals for Al conductors 16 mm² to 1200 mm² are made of solid aluminium 99.7%.
      C sleeves
      Branching sleeves for Cu conductors 6-300 mm², made of copper 99.95%.
      Pre-insulated terminals
      Elpress’ pre-insulated terminal consist of ring, fork and pin terminals made of copper and flat and round pin terminals of brass or tin bronze.
      Un-insulated terminals
      Elpress uninsulated connections up to 10 mm² consists of through connectors, rings, ferrules, forks and pin terminals made of electrolytic copper.
      End terminals
      Elpress pre-insulated and uninsulated end terminals are made of tin-plated copper.
      Overhead line connectors
      Elpress has a programme for overhead line joints that comprises products for copper lines, alloyed aluminium lines of type AlMgSi (Super B) and Al59 and FeAl lines.
      Shearbolt connectors
      Shearbolt connectors are intended for stranded and solid aluminium and copper cable, low voltage and medium voltage up to 36 kV.
    • Mechanical hand tools
      Mechanical hand tools for crimping 0,14-120 mm².
      3,5 t system
      Electrohydraulic, electromechanical and hydraulic hand tools with up to 3.5 tons of pressing force.
      6 t system
      Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 6 tons of crimp force.
      13 t system
      Crimping heads, hydraulic hand tools and battery-powered crimping tools with up to 13 tons of crimp force.
      25 t system
      Crimping heads with up to 25 tons of crimp force.
      35 t system
      Crimping heads with up to 35 tons of crimp force.
      40 t system
      Crimping heads with up to 40 tons of crimp force.
      Hydraulic pumps
      Hydraulic foot pump and mains and battery operated pumps.
      Crimp stations and table stands
      Crimp stations for industrial crimping. Table stands designed for operators with high frequency use of the C2 crimp head.
      Dies, matrices and punches
    • Elpress Stripping tools
      Cutting tools
      Elpress Combination tool for cutting and stripping
      Hydraulic cable cutters
    • Assortment boxes
      Cable joint and terminal
      Cable clamps (cleats)
    • Deep earthing system FS
      Accessories for depth earthing, tip, leading rod, extension rod, withdrawal handle and driving cap.
      Deep earthing system FSHD
      Accessories for depth earthing, tip, leading rod andextension rod. For hard and stony soils.
      Driving studs for FS and FSHD
      Driving studs for Elpress deep earthing system, specially designed for use with the FS21 and FS31 rod.